Wlan; Wlan Status - Pirelli Discus DP-L10 User Manual

8.
The Dual mode phone has been pre-configured to work with any open wireless
network. The phone will obtain an IP address automatically once it recognizes
and connects to the WLAN network.
Any modifications made to the internal configuration of this device, not
expressly approved by your service provider will void the warranty of this
device.
The WLAN settings interface allows you to check WLAN network status, and
set profiles. It includes five functions,
status, SIP
8.1
You can fast set up when it is ready in idle mode, see which network displayed
when select the corresponding wireless network (GSM and WLAN).
•
Telephone
• SSID: connected WLAN names (WLAN Modem, Access-Point)
•
Auth.
• BSSID: MAC Address ofconnected WLAN Modem (Access-points)
• Channel: channel used. Available values 1-13; it depends on the WLAN
Modem.
•
Signal lenght
•
IP Telephone
•
Subnet mask
•
Gateway
•
DHCP Server
•
Main DNS Server
•
Sec. DNS Server
•
WMMstatus
Example 1: the bar that above the G-symbol (1) left displays the GSM
network's strength. To make the network usable, there should be at least three
bars displayed on the screen.
VoIPon www.voipon.co.uk

WLAN

settings, and
NAT

WLAN status

MAC: MAC address of Dual Mode telephone
type: protection used (WEP, WPA, WPA2 or none)
sales@voipon.co.uk
WLAN status,
settings.
Tel: +44 (0)1245 808195
Chapter
WLAN settings, SIP
Fax: +44 (0)1245 600030
8
73