Sending Faxes; Receiving Faxes - Sharp FO-10 Operation Manual

Quick Reference Guide

Sending Faxes

Place your document
(up to 5 pages) face
down in the document
feeder.
(FO-10: Only one page
can be loaded at a time.)
Normal Dialing
1. Lift the handset or press
2. Dial the fax number.
3. Wait for the reception tone (if a person
answers, ask them to press their Start
key).
4. Press:
START
Rapid Key Dialing
Press the appropriate Rapid Key.
Transmission will begin automatically.
(Note for FO-10: Rapid Key Dialling is not
avaiable.)
Speed Dialing
SPEED
1. Press:
DIAL
2. Enter 2-digit Speed Dial number.
3. Press:
START
96

Receiving Faxes

Press the RESOLUTION/RECEPTION
MODE key until the arrow in the display
points to the desired reception mode (make
sure the document feeder is empty).
SPEAKER
FAX mode: The fax machine automatically
answers on the set number of rings and
receives the incoming document.
TEL mode:
TEL/FAX mode: The fax machine
automatically answers on the set number of
rings and receives faxes. Voice calls
(including manually dialled fax
transmissions) are signalled by a special
ringing sound.
A.M. mode: Select this mode when an
answering machine is connected to the fax
and the answering machine is turned on.
05
RESOLUTION/
RECEPTION MODE
05
05
05
Beep
RECEIVING
TEL FAX
NOV 10:30
TEL/FAX A.M.
TEL FAX
NOV 10:30
A.M.
TEL/FAX
TEL FAX
NOV 10:30
TEL/FAX A.M.
TEL FAX
NOV 10:30
TEL/FAX A.M.
START