Sharp FO-10 Operation Manual page 42

Storing fax and telephone numbers for Automatic Dialing
1
Press these keys:
The display will alternately show:
FAX/TEL # MODE
1=SET,2=CLEAR
2
Press the 1 key to select SET.
The display will alternately show:
FAX/TEL # SET
ENTER SPEED #
3
Enter a two-digit Speed Dial number
by pressing the number keys (01 to
05 for Rapid Key Dialing, 06 to 40
(FO-10: 01 to 10) for Speed Dialing).
4
Enter the fax or voice number by
pressing the number keys.
(Note: A space cannot be entered.)
• To clear a mistake, press the
SPEED DIAL key.
♦ If a pause is required between any of the digits to access a special
service or an outside line, press the REDIAL key (two seconds per
pause). The pause will appear as a hyphen. Several pauses can be
entered in a row.
Sending a Fax by Automatic Dialing
FUNCTION
3
1
0
2 2
3 4
1
(Example)
5 6
7
(Example)
41