Toshiba TLP-X4500 Service Manual page 29

6-11 HIDDEN SERVICE menu
HIDDEN SERVICE
FILTER TIME ON
MUTE COLOR BLACK
AIR-SENSOR
Setup of Filter time ("ON" or "OFF")
1. Select the "FILTER TIME" on the OSD using button " " .
Next press the " " to select "FILTER TIME MENU" by the HIDDEN SERVICE MENU.
2. TURN ON : Select the "TURN ON" on the OSD using button " ".
TURN OFF : Select the "TURN OFF" on the OSD using button "
3. The OSD will be ended by no operation for 10 seconds or change of input signal. To end immediately, use
one of buttons except buttons " ", "
6-12 Set operating time display method (accumulated lamp time display method)
1. Select [OPTION] from the [MENU] display, then select [LAMP TIME].
2. Press the [RESET] button once, then press [KEYSTONE] for 3 seconds or more to display the screen
shown below. (The menu will close after 10 seconds if there are no further operations.)
3. Use " " or " " to select the usage status number. (The usage status is as shown below.)
Usage status number
TLP-X4500(P5XMLA)
To display the OSD for "HIDDEN SERVICE" menu set up.
By the control panel
1. Display the menu by the "MENU"
button.
2. Select the "OPTION" on the menu.
3. Continue press the button " " fi rst,
then press the button " " together
with "RESET", and hold for 3
seconds.
", " ", " ".
OPTION
RUN TIME
1234h
On
Off
No.0
Usage status number (See below)
0 ..... Total usage status
1 ..... Current usage status
2 ..... Usage status before first reset
3 ..... Usage status before second reset
||
9 ..... Usage status before eighth reset
28
By the remote control transmitter
1. Display the menu by the "MENU"
button.
2. Select the "OPTION" on the menu.
3. Press the "MAGNIFY OFF" button.
Next hold the "MAGNIFY OFF"
button for 3 seconds.
".
Time
00012
Number of times on
00011
Number of times off