Hdmi Output - TrekStor SmartTV Station User Manual

20 User manual
BD :
MENU
To activate/deactivate the display of the BlueRay menu.
A
UTOMATIC SLEEP
Use this feature to enable or disable the automatic shut-off after 2 hours.
CEC:
Through this function component overlapping control functions are provided,
including:
O
NE TOUCH PLAY
between TV and SmartTV Station.
O
NE TOUCH STANDBY
SmartTV Station when switching off the TV.
A
UTO POWER ON FROM
when switching on the SmartTV Station.
F
ACTORY SETTINGS
Here you can reset your customized settings back to the factory settings.
Audio
Go to Settings  Audio and choose with the help of the navigation cross of your
remote control those settings, which you would like to edit:
HDMI :
OUTPUT
When using an HDMI connection as an audio output, you will have the following
options:
LPCM: The signal is recoded. Has the original signal been e. g. Dolby Digital
5.1, not this is played, but a unified PCM signal (stereo sound).
RAW: The audio signal is emitted as it is (raw format). If, for example, the
signal is Dolby Digital 5.1, it is emitted as such. This requires a connected
audio system that supports this feature.
A : For automatic selection of the audio playback.
UTO
:
: To enable/disable the CEC signal of the HDMI interface
: To enable/disable the automatic shutdown of the
TV: To enable/disable the automatic start of the TV
: