GD AQUALINE 1100 Installation & Operating Instructions Manual page 10

Safety instructions and hazard alerts
• Secure the drive against starting before beginning
to work on the machine.
• When work is carried out on the system, the latter
must not be under pressure or vacuum.
On the vehicle: Close the stop slide valve. Bleed or
vent the pressure line between the system and the
stop slide valve.
Relieve elevated pressure manually at the safety
valve. Observe the pressure gauge reading.
• Remove the drive guard only when the machine is
not running.
• Remove the safety guard only when the machine
and the pressure line have cooled down.
• Before starting the machine, make certain that all
guards are installed and in place.
Environmental protection requires that all
emerging fluids, e.g., cooling water, cooling oil
or lubricant residue, are collected and dis-
posed of as prescribed.
4990671000 February 2008
10