Deleting The Stored Memory Of Blood Glucose/Cholesterol/Uric Acid/Hemoglobin Test Results; Taking Care Of Your Meter; Maintaining The Meter; The Battery Replacement - Kernel Multi Check User Manual

Deleting the Stored Memory of Blood Glucose/Cholesterol/Uric Acid/Hemoglobin Test Results

1. When the newest blood glucose/cholesterol/ uric acid/hemoglobin test result is displayed
,press "S" button for 3 seconds.The newest blood g l u c o s e / c h o l e s t e r o l / uric acid/
hemoglobin test result is deleted as soon as you hear the "Beep" sound from the meter.
2. The stored results can be deleted in order from the most recent to the oldest via press "S"
button for 3 seconds.
3. If you decide to stop deleting the results, stop pressing the "S" button.The meter can
automatically turn off in 30 seconds.

Taking Care of Your Meter

Maintaining the Meter

Do not drop, hit or smash your meter.
Keep your meter between 14°F and 140°F (-10°C and 60°C) and below 95% of relative
humidity. Do not store meter in areas such as the kitchen, bathroom, laundry room or car.
Keep the meter away from water.
Do not use glass/household-cleaning solutions to clean the meter. Simply use an alcohol
pad to wipe the surface of the meter, but do not wipe the test strip slot or code key slot.
Do not disassemble the meter.
If you have any questions, please contact Customer Service or your healthcare provider.

The Battery Replacement

When the symbol"
1. Slide battery cover off from the back of the meter.
2. Remove old batteries and insert 2 new AAA size batteries (1.5V) into the battery compartment.
" is displayed on the screen, please replace batteries immediately.
39