Understanding Your Blood Cholesterol Test Results - Kernel Multi Check User Manual

Cautions:
If you don't apply enough blood, You might need to use a new test strip to do the test again.
10. In about 150 seconds, the screen will display measured cholesterol value. Record the
cholesterol value in your log book.
11. Pull the test strip out of the meter. The meter will turn off by itself
12. Unscrew the adjustable tip of the puncturer.
13. Put the protective cover of the lancet back on the lancet.
Grip the puncturer holder firmly and pull the lancet out.
14. Discard the used lancet in an appropriate container with a lid.
15. Screw the adjustable tip back on the puncturer.
Cautions:
To avoid accidental injury, do not leave used lancet in the puncturer.
Always remove the used lancet immediately after each test.
Be sure to follow your local regulations for proper disposal of used
test strips and lancets.

Understanding Your Blood Cholesterol Test Results

Normal fasting blood cholesterol is below 200 mg/dL.(5.2mmol/L)
However, the above range is just a reference, and it may not apply for every person.
Consult your doctor for the appropriate range for you.
29