Table of Contents
Advertisement
Supported I/O modules
The I/O modules that can be used to connect to the Broadcom 10Gb 2-Port and 4-Port Ethernet
Expansion Cards (CFFh) are listed in Table 3.
Table 3. I/O modules supported with the Broadcom 10Gb 2-Port and 4-Port Ethernet Expansion Cards
I/O module
BNT 6-port 10Gb High Speed Switch Module
10Gb Ethernet Pass-Thru Module for IBM BladeCenter
BNT Virtual Fabric 10Gb Switch Module
Cisco Nexus 4001I Switch Module
The I/O module listed in Table 3 is supported in BladeCenter H and BladeCenter HT chassis only.
In BladeCenter H, the ports of CFFh cards are routed through the midplane to I/O bays 7, 8, 9, and 10, as
shown in Figure 3. The BladeCenter HT is similar in that the CFFh cards are also routed through the
midplane to I/O bays 7, 8, 9, and 10.
Broadcom 10Gb 2-Port and 4-Port Ethernet Expansion Cards (CFFh) for IBM BladeCenter
Part number
39Y9267
N
N
46M6181
N
N
46C7191
N
N
46M6071
N
N
Y
N
Y
N
N
Y
N
Y
N
N
Y
N
Y
N
N
Y
N
Y
N
N
4
Advertisement
Table of Contents
