Ignition Electrode Replacement; Flame Detection Electrode Replacement - IDEAL Esprit eco 24 Installation And Servicing Manual

44 IgNITION ELECTRODE REpLaCEMENT

1. Refer to Frame 40.
2. Remove the burner. Refer to Frame 48.
3. Unplug the ignition lead from the electrode.
4. Remove the earth lead from the ignition
electrode.
5. Remove the 2 screws holding the ignition
electrode to the combustion chamber.
6. Remove the electrode.
7. Fit the new ignition electrode, using the new
gasket supplied. Check dimensions as shown.
8. Reassemble in reverse order.
9. Check the operation of the boiler. Refer to
Frames 29 & 30.
Spark Gap
3.5mm

45 FLaME DETECTION ELECTRODE REpLaCEMENT

1. Refer to Frame 40.
2. Remove the burner. Refer to Frame 43.
3. Unplug the flame detection lead from the
electrode.
4. Remove the 2 screws retaining the detection
electrode.
5. Remove the electrode.
6. Fit the new flame detection electrode, using the
new gasket supplied.
7. Reassemble in reverse order.
8. Check the operation of the boiler. Refer to
Frames 29 & 30.
Esprit eco -
Installation and Servicing
SERVICING
Ignition Electrode
g e
e d
h t
a i g
S t r
m
3 m
Flame Detection Electrode
g e
e d
h t
a i g
S t r
m
. 5 m
1 2
39