Table of Contents
Advertisement
These are normal operating conditions for Sony's first high Definition TV during power on/off and input selection conditions.
Operation
Initial Step
Plug in
AC connection
Nothing
Power ON
Master power ON
1.
A
button pressed
2.
3.
Power ON
Power ON in
1.
B
remote pressed
2.
3.
TV OFF
Master Power
2 relays clicks
A
OFF pressed
TV sound mutes
TV OFF
Remote power
2 relays clicks
B
OFF pressed
TV sound mutes
When this TV is ON there is no static electricity felt at the CRT screen.
It is normal to have black left & right borders on both sides of the picture when viewing a 4:3 aspect ratio picture on a 16x9 aspect ratio TV picture tube.
Selection
Access Step
Video input
Press TV/Video button
until video 1, 2, or 3
appear on the screen
DVD, HD, input or
Press TV/Video button
High Definition TV input
until DVD or HD input
from external box
is selected.
VHF / UHF input
Press the TV button on
the remote
Cable Input
Press the TV button on
the remote
Model KW-34HD1 - Normal Operation
Power ON
Sounds
Nothing
2 Relays click immediately
1.
Front panel Standby light:
Degaussing coil energized
2.
Blinking after relay click
(humming sound)
3.
Stops blinking in about 7 seconds when the picture
TV audio 1 sec after relays click
appears.
4.
OSD: Yellow characters "Please check DTV
receiver connections"
2 Relays click immediately
1.
Front panel Standby light:
Degaussing coil energized
2.
Standby light starts blinking after relay click
(humming sound)
3.
Stops blinking in 7 seconds when the picture
TV audio 1 sec after relays click
appears.
4.
OSD reads in Yellow characters "Please check
DTV receiver connections".
Picture goes dark
All lights out
Picture goes dark
Standby light comes ON
TV Operation with NO Inputs connected
Sounds
No sound when there is
no video input.
No sound when there is
no input.
Off the air white noise
from the unconnected
VHF/UHF input.
Off the air white noise
from the unconnected
cable input.
19
Visual
Visual
Video 1, 2, or 3 appears in green letters at the upper left corner of the screen.
Screen is dark with no video input.
DVD or HD appears in green letters at the upper left corner of the screen.
Screen is dark with no input.
OSD station number appears in green at the upper right corner of the screen
with snow. TV channels can be entered by remote or the up/down buttons
will work if stations were programmed during set up.
OSD "C _" appears in green at the upper right corner of the screen with
snow. Cable channels can be entered by remote or the up/down buttons will
work if cable stations were programmed during set up.
Conditions
Front panel Master power button off
AC connected.
Set formerly OFF (by remote).
1.3 Amps @120Vac
AC connected.
Master power button ON
Standby light ON
TV OFF
1.3 Amps @120Vac
Conditions
Power ON
No inputs
Power ON
No inputs
Power ON
No inputs
Power ON
No inputs
Advertisement
Table of Contents
