Wheels And Tyres - PIAGGIO B 250 Workshop Manual

Characteristics
Brakes
Specification
Front brake
Rear brake

Wheels and tyres

Specification
Front wheel rim
Rear wheel rim
Front tyre
Rear tyre
Front wheel tyre pressure (when cold)
Rear wheel tyre pressure (when cold)
Rear wheel tyre pressure (with driver and passenger) (when
N.B.
CHECK AND ADJUST TYRE PRESSURE WITH TYRES AT AMBIENT TEMPERATURE. REGU-
LATE PRESSURE ACCORDING TO THE WEIGHT OF THE RIDER AND ACCESSORIES
Secondary air
The SAS for 125cc leader engines operates in a similar manner to the SAS for 2T engines.
The differences are the following:
instead of entering through the muffler as for 2T engine, the secondary air enters directly in the discharge
pipe on the head.
CHAR - 10
BRAKES
WHEELS AND TYRES
cold)
Desc./Quantity
Disc brake, diameter 260 mm and floating calliper with twin
plungers and hydraulic control (lever on the far right of the han-
dlebar)
Disc brake, diameter 260 mm and calliper with two counteract-
ing plungers and hydraulic control (lever on the far left of the
handlebar)
Desc./Quantity
Light alloy, 3.00 x 16"
Light alloy, 3.50 x 16"
110/70-16" M/C 52P Tubeless
140/70-16" M/C 65P Tubeless
2.1 bar
2.3 bar
2.5 bar
B 125-250