L.L.Bean Bicycle Final Assembly Instructions

Bikes with 16” wheel siz

Download this manual

Final Assembly Instructions – Bikes with 16" Wheel Size

Thank you for buying your new bicycle from L.L.Bean. Read these instructions carefully before beginning the final

assembly. Prior to shipping, our expert cycling technicians completely assembled and tuned your bicycle to ensure that

all components are functioning properly. However, for shipping purposes we have to partially disassemble your bicycle.

Although this bicycle has been factory pre-assembled, some loosening may have occurred during shipping and handling.

WARNING: BEFORE ALLOWING A CHILD TO RIDE THIS BICYCLE, read the enclosed Owner's Manual

thoroughly. The Owner's Manual includes important information on customizing the bike for an optimal fit.

Tools required for final assembly:

•

Cutting-type pliers – for removal of packaging materials, including "zip-ties"

•

5mm & 6mm Allen wrenches – for tightening stem bolt

•

15mm wrench or adjustable wrench – for tightening pedals

•

13mm wrench or adjustable wrench – for tightening handlebar stem and seat binder bolt

•

Two 10mm wrenches or two adjustable wrenches or one of each – for attaching front fender

BEFORE GETTING STARTED:

PLEASE REMOVE BICYCLE FROM BOX AND REMOVE PACKAGING MATERIAL. Recommended tool –

diagonal-cutting pliers, wire cutter, heavy-duty shears, or multi-tool wire cutter.

QUESTIONS: Should you have any questions during the final assembly of your new bicycle, please call our product 4/4/11

specialists at 800-226-7552 any day between 8:00 a.m. and 10:00 p.m. Eastern.

FYI - Your bicycle may appear different

from those in photos.

pg.1

Page 1 FYI - Your bicycle may appear different from those in photos. QUESTIONS: Should you have any questions during the final assembly of your new bicycle, please call our product 4/4/11 specialists at 800-226-7552 any day between 8:00 a.m. and 10:00 p.m. Eastern.
Page 2 Tighten the bolt and nut. Correct washer placement QUESTIONS: Should you have any questions during the final assembly of your new bicycle, please call our product 4/4/11 specialists at 800-226-7552 any day between 8:00 a.m. and 10:00 p.m. Eastern. pg.2...
Page 3 REMEMBER, the handlebar stem may be raised or lowered for comfort, but it should never be raised above the “minimum insertion line” marked on the stem. QUESTIONS: Should you have any questions during the final assembly of your new bicycle, please call our product 4/4/11 specialists at 800-226-7552 any day between 8:00 a.m. and 10:00 p.m. Eastern.
Page 4 QUESTIONS: Should you have any questions during the final assembly of your new bicycle, please call our product 4/4/11 specialists at 800-226-7552 any day between 8:00 a.m. and 10:00 p.m. Eastern.
Page 5 Generally, you do not want to raise your saddle higher than determined by this method. If you have to rock your hips to reach the bottom of the pedal stroke, then your saddle is too high. However, if while riding your bicycle, this position doesn’t feel comfortable to you, adjust as necessary.

16” wheel size bike