AirSep FreeStyle Service Manual page 58

5. When installing the new fan, be sure the arrow on the side of the fan is
6. Insert screws through each of the four corners of the fan. Secure with kep nut.
7. Connect Molex connecter to the circuit board.
5-32
pointing outwards toward the front cover. This arrow indicates the direction of
the airflow of the fan. Be sure the two wires coming from the fan are located
on the upper left side.
(Figure 5.49a, b)
Figure 5.49a
Do not over tighten.
Figure 5.49b
AirSep Corp. — FreeStyle Service Manual