Table of Contents
Advertisement
1.
SYSTEM WORK CONFIGURATION
Name cell: WORKCONFIG
Number field cell: 110000
Comment:
1st number = permission to control relays, if any relay is switched On.
"0" = deny. "1" = allow;
2nd number = control relays via SMS.
"0" = all users. "1" = only administrator;
3rd number =Dial to ADMIN if any Inputs triggered.
"0" = deny. "1" = allow;
4th number =Inputs/Outputs Extension module up to 16 Inputs.
"0" = not connected. "1" = connected;
5th number = controller operating mode.
"0" = Gate Intercom/Opener mode. "1" Alarm system mode;
6th number = Alarm Siren activation (in Alarm mode only).
"0" = only when Alarm. "1" = short beep, Arm/Disarm mode
2.
SYSTEM SMS CONFIGURATION
Name cell: SMSCONFIG
Number field cell: 010010
Comment:
1st number = SMS about power On/Off.
"0" = deny. "1" = allow;
2nd number = sending SMS to Administrator (ADMIN) when calling
unauthorized person to system
"0" = deny. "1" = allow;
3rd number = SMS about Relay On/Off activation.
"0" = deny. "1" = allow anyway; "2" = allow if Relay On; "3" = allow if Relay Off;
4th number = send SMS about external inputs status
"0" = send to admin. "1" = send to the admin and Users;
5th number = call credits limit balance information SMS
"0" = send to administrator and Service engineer. "1" = send to any number by request;
6th number = response SMS to manage security reaction (not use in Intercom mode)
"0" = only who arm/disarm the alarm. "1" = who arm/disarm alarm and send copy SMS to
the Admin number also;
(not use in Intercom
mode)
8
Advertisement
Table of Contents
