Table of Contents
Advertisement
ALARM system control by SMS
Alarm activation ARM
Format SMS query:
Format response SMS:
If sensors not ready
When all OK :
If system was ARMED:
Perimeter Alarm activation
Format SMS query:
Format response SMS:
If sensors not ready
When all OK :
If system was ARMED:
Alarm deactivation DISARM
Format SMS query:
Format response SMS:
When all OK :
If system was DISARMED:
OUTPUT RELAY control by phone
(Gate Intercom/Remote mode)
When GSM controller receives a call from USER, it will check the calling number and if
the number is in the list you have prepared it will reject the call and switch On Relay.
The GSM system doesn't answer the call; it simply checks the caller ID.
Your network must send the caller ID otherwise it will not work.
Usually operators don't charge until you answer the call, so it won't cost you anything to
control external equipment.
(Alarm mode)
When WORKCONFIG 5
R1 –alarm LED Indicator
R2- siren
R3,R4- for any other external equipment control by SMS
To ARM Alarm system – need make a call to controller and after 2-3 rings hang-up handset
System call-back once, to confirm- system Armed (not need answer to call).
To DISARM – need make a call to controller and wait until controller reject call. System
Disarmed. If in one minute will be no trigger signal on any Input, system will go to ARM
mode automatically, and call-back once, to confirm- system is Armed (not need answer to
call).
ARM
:
ARM not possible! Please check Input sensors
OK! System ARMED!
Warning! System already ARMED
ARM PERIMETER
ARM PERIMETER
:
ARM not possible! Please check Input sensors
OK! Perimeter ARMED!
Warning! System already ARMED
DISARM
OK! DISARMED!
Warning! System already DISARMED
th
number is "1" (Alarm system mode) , OUTPUT Relay :
13
Advertisement
Table of Contents
