Table of Contents
Advertisement
IMPORTANT!
When mounting the GSM antenna, choose a location which is away from human interaction
and away from the alarm panel. Route the GSM antenna cable from the GSM BackUp so
that it is separate from the power supply cables Always ensure the power is off to the GSM
BackUp before inserting or removing the SIM card.
New SIM cards will need registering before they can be used. Full details of how this is
done can normally be found in the SIM card pack. It will normally require that the SIM card
is inserted into a mobile phone, a number dialled and instructions followed. While the SIM is
in the mobile phone it would be a good time to disable any PIN codes, call diverts, ring back
and disable features such as voicemail and text alerts. Details of how to do this can be found
on the SIM card provider's web site or by calling their customer services. Please use one of
the following SIM card providers (Vodafone, TMobile, O2 or Orange). We do not
recommend using 3 at this present time.
SYSTEM SETUP
To make easy Installation, we made smart option on this GSM BackUp system and all main
programming job, system will do automatically!
1. Insert SIM card with disconnected PIN code to GSM System
2. Connect Alarm panel DIALLER, and Telephone Line to GSM BackUp connectors.
3. Switch power ON.
4. When READY LED ON, switch off power, remove SIM card from GSM system and insert
in to your mobile phone ,then go to Address Book to edit ADMIN and USER numbers.
All others settings (SMSCONFIG and WORKCONFIG) system will enter automatically
by Factory default.
5. If you want to change GSM system settings, you can do direct on SIM card from your
handset, or remotely by SMS.
6
Advertisement
Table of Contents
