Advertisement
3. Configuring WebEye E10/E104
1) Start web browser and access
WebEye E10/E104.
2) Enter administration page of
WebEye E10/E104.
3) Select 'Serial Configuration' in
administration menu.
4) Select 'Audio Device' in 'Select
Attached Device' menu.
5) Select 'On' in 'AGC Control
Enable' in AGC(Automatic Gain
Control) function needed.
6) Configure 'Microphone Volume
Level'.
7) Click 'Apply' button to confirm
the configuration.
8) Click 'Goto Viewer Page' to
monitor image.
*
When
Audio
configuration
completed, the LED blinks.
* When 'AGC Control Enable' is
configured as 'On', Mic. volume
may not be controlled.
is
Advertisement
