Advertisement
Quick Links
Advertisement
Related Manuals for WebGate WebEye A10
Summary of Contents for WebGate WebEye A10
- Page 1 WebEye A10 User’s Guide V 1.5 WebEye A10 User’s Guide WebGate Inc.
-
Page 2: Product Descriptions
WebEye A10 User’s Guide V 1.5 I. Introduction WebEye A10 is an audio transmission kit that can use with connecting to WebEye E10/E104. Users may hear real-time sound with image from remote place through WebEye’s homepage co nnected to WebEye A10, and use for remote-monitoring, audiovisual conference, etc. - Page 3 1. Connecting with WebEye E104 1) Connect dedicated cable between WebEye E104 and WebEye A10 2) Check LED on WebEye A10. LED goes on when it is powered and blinks when transmitting data. * There is no need to connect external power supply to the A10 since WebEye E104 supplies power to WebEye A10 through dedicated cable.
- Page 4 WebEye A10 User’s Guide V 1.5 * Connecting external camera and WebEye A10 to WebEye E10 through DB-15 port...
- Page 5 3) Prepare 3 wires (RX, TX, and GND) to connect to B101. (Power wire is not used with B101) 4) Connect the 3 wires to WebEye B101 and RJ-45 jack to Webeye A10 5) Check LED on WebEye A10. LED goes on when it is powered and blinks when transmitting data.
- Page 6 3) Prepare 3 wires (RX, TX, and GND) to connect to B106. (Power wire is not used with B106) 4) Connect the 3 wires to WebEye B106 and RJ-45 jack to Webeye A10 5) Check LED on WebEye A10. LED goes on when it is powered and blinks when transmitting data.
- Page 7 3) Prepare 3 wires (RX, TX, and GND) to connect to SPD. (Power wire is not used with SPD) 4) Connect the 3 wires to WebEye SPD and RJ-45 jack to Webeye A10 5) Check LED on WebEye A10. LED goes on when it is powered and blinks when transmitting data.
- Page 8 WebEye A10 User’s Guide V 1.5 6. Configuring WebEye 1) Start web browser and access WebEye. Enter administration page WebEye. 3) Select ‘Serial Configuration’ in administration menu. 4) Select ‘Serial #1’ in Serial Configuration For Port #1 5) Select ‘Audio Device’ in ‘Select Attached Device’...
- Page 9 When you utilize A10 for audio transmission, use external microphone for it. • WebEye A10 has high -sensitivity internal microphone, so it may transmit with being amplified both surrounding noise and signal. In case of severe noise, we recommend using external microphone.