Advertisement
III. WebEye A10 Connecting & Configuring
1. Connecting WebEye A10 to WebEye E10
1) Connect power supply to WebEye A10
2) Connect dedicated cable between WebEye E10 and WebEye A10
3) Check LED on WebEye A10. LED goes on when it is powered and blinks when
transmit ting data.
* Make sure not to initially connect dedicated cable before supplying power to
WebEye A10
2. Connecting WebEye A10 to WebEye E104
1) Connect dedicated cable between WebEye E104 and WebEye A10
2) Check LED on WebEye A10. LED goes on when it is powered and blinks when
transmit ting data.
* There is no need to connect external power supply to the A10 since WebEye
E104 supplies power to WebEye A10 through dedicated cable.
Advertisement
