Table of Contents
Advertisement
LENS
The lens is not supplied with this camera. Purchase a lens suitable for your environment. This
camera accepts the auto iris lens and both C-and CS-mount lens.
M
To use the functions of this camera effectively it is recommended that a DC type Auto Iris lens is
used.
Keep the lens surface clean, if it becomes contaminated with dirt or fi ngerprints the picture
quality suffers.
WHEN USING AUTO IRIS LENS
1.
Strip the insulation of the auto iris lens cable 8mm from the end.
2.
Strip the insulation of the core of the auto iris lens cable to expose a 2mm length.
3.
Remove the cover of the auto iris lens connector plug and solder the lens cable
to the connector pin of the plug.
Pin No.
DC
No.1 Pin
Damping -
No.2 Pin
Damping +
No.3 Pin
Drive +
No.4 Pin
Drive -
LENS
VIDEO
Red (power)
No.1 Pin
NC
White (video signal)
Black (GND)
approx. 8mm
approx. 2mm
No.3 Pin
Connector
No.4 Pin
No.2 Pin
Lens cable
English_15
Advertisement
Table of Contents
