Before Use - Scott DJX 60 TT User Manual

IMPORTANT SAFETY INSTRUCTIONS
DO NOT OPEN
RISK OF ELECTRIC SHOCK
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use to the
presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation mark within the equilateral triangle is intended to alert the user to the presence of important
operation and maintenance (servicing) instructions in the literature accompanying this appliance.
To prevent the risk of an electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet
unless the blades can be fully inserted, in order to prevent blade exposure.
LINE VOLTAGE SELECTION
Because power supplies vary from country to country, this appliance includes a
power supply selection switch.
The desired voltage may be set with the VOLTAGE SELECTOR switch located
under the platter (use a flat head screw driver).
Do not force the VOLTAGE SELECTOR switch as this may cause damage.
If the VOLTAGE SELECTOR switch does not move smoothly, please contact a
qualified service technician.
Disposal
Disposal of waste electrical & electronic equipment (applicable in the European Union and other European countries
with separate collection systems).
This symbol on the product or on its packaging indicates that this product must not be treated as
household waste. Instead it must be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. The recycling of materials will help to conserve
natural resources. For more detailed information about recycling of this product, please contact your
local authorities, your household waste disposal service or the shop where you purchased the product.

BEFORE USE

Check that the following parts are included in the package with the main unit:
Platter
Slipmat
Headshell
Very Important!
Do not forget to attach the rubber belt to the motor for correct operation. After placing the
Turntable Platter onto the turntable through the Center Spindle, move one of the large
windows on the Platter to top right corner. Attach the rubber belt around the motor.
(The rubber belt is already attached to the underside of the Turntable Platter.)
Notes:
1. Do not connect the AC power plug before assembly has been completed.
2. Before turning the power on, make sure once again all the connections and power voltage settings are correct.
Always turn off the power when connecting or disconnecting.
3. Read this manual carefully before using the unit. Be sure to store the manual in a safe place for future reference.
CAUTION: To reduce the risk of electric shock, do not remove any cover.
No user-serviceable parts inside. Refer servicing to qualified service
personnel only.
CAUTION
Cartridge
USB cable
Counter weight
Disc
RCA cable
Dust cover
GB2
45 rpm adaptor
Instruction manual