Button Programming - Studiologic VMK-88 plus Manual

VMK88 MANUAL BUTTONS
plus
PROCEDURE: BUTTON PROGRAMMING
We will set up a BUTTON to behave like a simple ON/OFF switch, or Latch Switch. Press the
BUTTON once and the Switch will
be on. Press the BUTTON again and the Switch will be off.
Programing Transport BUTTONS follows the exact same procedure.
TIP: This can be very useful to control the Mutes on your Audio/Sequencing program. Most Pro
and Semi Pro Audio/Sequencing programs will allow you the option to control various functions
of the program from an external controller, in this example, controlling the Mutes on your virtual
mixer. (See your Program's manual for details.) Each BUTTON can behave like a Latch,
used in this Mute example (SWITCH MODE), or like a Momentary (PUSH MODE) switch. A Mo-
mentary switch will only function when the BUTTON is held down. This is very useful for the Fwd
BUTTON and Rew BUTTON in the Transport section.
1)PRESS EDIT
2)PRESS BUTTON
In this example, PRESS BUTTON 1
with Bank A Selected.
Set to Midi Channel 1
3)PRESS PAGE UP
In this example, we'll set
CTRL Change to OFF
You may adjust this to any
CTRL number you desire.
4)PRESS PAGE UP
Set the Key Note to 60.
Key range is 0-127
5)PRESS PAGE UP
SWITCH: Press button once,
a NOTE ON Message will transmit.
Switch is ON.
Press button again, a NOTE OFF
Message will transmit.
Switch is OFF.
14