(2) Connect one wire to the N terminal of the AC terminal block, and tighten the screw
firmly to clamp the wire.
Connect the other wire (after performing step 2) to the L terminal, and tighten the screw
firmly to clamp the wire.
(3) Connect the grounding wire to the leftmost GND terminal of the AC terminal block, and
tighten the screw firmly to clamp the wire.
(4) Confirm that all wires are correctly and securely connected to the terminals of the solar
power inverter.
Confirm that all the screws do not move if the connected wires are pulled or bent.
Tighten all the screws firmly again.
16
N
L
GND