Sharp JH-1600E Installation & Operation Manual page 16

(3) Connect the black wire to the positive terminal of the terminal block, and tighten the
screw firmly to clamp the wire.
(4) Attach a forked spade or lug connector to the cables before connecting to the terminal
block.
(5) Connect the white wire to the negative terminal of the terminal block, and tighten the
screw firmly to clamp the wire.
(6) Confirm all of the wires are correctly and securely connected to the terminals of the
solar power inverter.
14
WARNING: SHOCK HAZARD
The inverter must be grounded by connection to a grounded permanent wiring system.