Mackenzie DV-2000 User Manual page 8

EJECT / RECORD STOP PUSH-BUTTON:
This ejects the tape when the system is playing a
message. If pressed during the recording process the
recording will be stopped.
TAPE EJECTED LED:
Yellow light on indicates there is no cassette
inserted.
Insert cassette, yellow light off = cassette in place,
will start memory loading.
RECORDING LED:
Used to determine tape loading mode. Red light
on, indicates message (s) is being loaded into
memory
M-O-H LED:
This green LED is on when the system is playing
a Pre-Recorded message.
SPEAKER PUSH-BUTTON:
Local Monitor ON/OFF
POWER:
Insert power adapter supplied.
APHEX:
Adjusts the amount of high frequency
enhancement necessary to deliver the best
overall system performance.
LINE OUT:
Audio output level at of to +4dp into 600 , this is
a standard level for most applications.
SPKR OUT:
Audio output level at up to 1.5W into 8 use this
output if more drive is needed to reach a more
comfortable listening level.
The Mackenzie Dynavox
Digital Autoload Message On-Hold System
Model DV-2000 & DV-2000 PRO
LEVEL:
Adjusts the volume to the line
level or power audio outputs.
NOTE:
It is recommended That you leave the Cassette Tape in the system for
auto download operation.
Insert Pre-Recorded tape Cassette as shown ( Tape up, Facing label ),
system will rewind tape then start loading ( Red LED is on ) at the end
of downloading the message, the Red LED will turn off, system will
rewind the tape. It automatically the message from the digital audio
memory starts playing.
Monitor Speaker