Engine Oil - PIAGGIO MSS APE 50 2012 Service Manual

Table of Contents

Advertisement

Pre-delivery
Wait for a minute for the idle to stabilise.
Without ever operating the accelerator and using
the appropriate flow screw, bring the engine speed
to 1350 ±100 rpm.
Operate the throttle grip by slowly speeding up the
engine to a speed of 4000 rpm. and return to the
closed position:
Check that the idle speed remains at the previ-
ously established value, otherwise repeat the pro-
cedure.

Engine oil

LEVEL CHECK
Start the engine and stop it after having been run-
ning for about 1 minute at least.
Remove the control rod and check the oil level.
The oil level should be between the two notches
of the maximum and minimum.
Restore oil level if necessary and check for leaks.
WARNING
DO NOT REMOVE THE OIL COVER IMMEDIATELY AFTER
AN ACTIVITY WITH THE ENGINE AT FULL SPEED AND/OR
WITH THE ENGINE RUNNING. THE HEATED OIL MAY
LEAK, WITH THE RISK OF BURNING.
REPLACEMENT
Use a suitable container to collect the differential oil.
The oil change should be made with the engine warm.
PD - 414
Tracking ID-422/tukxi/04/2013
MSS APE 50 (2012)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2012 mss ape 50

Table of Contents