MSS APE 50 (2012)
1. Rod
2. Spring
3. Clutch control lever
4. Detent
5. Pin
6. Sector
7. Ring
8. Washer
9. Tie rod
10.Cotter pin
Parking brake adjustment
HAND BRAKE
During the use of the vehicle, you may notice a
slight lengthening of the hand brake stroke due to
normal wear.
The normal stroke should be 3-4 clicks.
To recover the clearance, proceed as follows:
•
Pull the hand brake lever for four clicks.
•
Loosen fixing nut "1".
•
Screw in hand brake adjuster screw "2"
until you feel the proper tension of the
bracket 3".
•
Tighten the fixing nut "1".
Make sure that with the hand brake lever in the rest
position, the rear wheels turn freely.
Tracking ID-422/tukxi/04/2013
Braking system
BS - 225