Programming Your "Towerchron Qm1 - Grasslin Towerchron QM1 Installation And User Instructions Manual

Programming your "TOWERCHRON QM1"

Setting time of day
Rotate the minute hand of the clock until the arrowhead in clock
face aligns with the correct time on the outer dial, i�e� 8 = 8�00 a�m�,
14 = 2�00 p�m�
Setting ON/OFF times
Move all tappets between ON and OFF times required to outer
position� The minimum switching time is 15 minutes�
Set any other ON/OFF periods in a similar manner
Slide switches (under drop down cover)
Pull top edge of drop down cover to gain access to slide switch�
The slide switch provide following functions:
– OFF service off completely
– TIMED service comes on between ON and OFF periods as set
on tappets on clock face
– CONST� service is on continuously
EN
ON OFF
TIMED
OFF CONST.
7