Page 1
Professional Breath Alcohol Analyzer With Fuel Cell Sensor FiT333 IMPORTANT: Many factors (e.g. environment gas residue, smoke & various smell in human mouth, etc…) may affect the Blood Alcohol Concentration (BAC) level, so the Readings are For Reference Only. Neither the reseller nor manufacturer accept any liability arising from the use of this unit.
Basic Scientific Principles…………………………………………………......4 Maintenance…………………………………………………………………………….….4 Intended Use………………………………………………………………………….…..4 Preparation…………………………………………………………..……………….……5 Power up…………………………………………………………………………….…..5 Operation instructions…………………………………………………………….…..…..6 Quick start……………………………………………………………..……………..…..6-7 Active Alcohol Test……………………………………………………….…………….…8 System Setting…………………………………………………….…………………...…..8-11 Test record…………………………………………………………………………………11 Sensor Test…………………………………………….…..………………………………11 PC download………………………………………….…..………………………………12 Change the wireless printer module………………………………………………………12 Accessory………………………………………………………………………….….…..13 Specification…………………………………………………………………...…………...14 Calibration…………………………………………….…………………….…...…...…..14 How often should I re-calibrate the FiT tester………………………………….…..14 2012-5-15 FiT333(333-11Y06139)
1. LCD with tough panel 2. Power Key 3. Back Key 4. “OK” Button 5. UP Key 6. Right Key 7. Down Key 8. Left Key 9. Mouth piece 10. Inner tube 11. USB Jack(Connect computer) 12. Printer 2012-5-15 FiT333(333-11Y06139)
7. USB Car adaptor (connect the unit machine directly charging in the car), 1pcs 8. PC Download cable,1pcs 9. Wireless Launch module,1pcs 10. Leather sheath, 1pcs 11. Printer paper, 4pcs 12. Charger,1pcs 13. Rechargeable Batteries 1.2V AA Ni-H(2400mAh or above),4pcs 2012-5-15 FiT333(333-11Y06139)
Never unscrew the FiT333. Warranty not valid if any screws had being loosened or warranty label had being broken. Serviced or repaired by personnel not employed by FiT Service centre or authorized by FiT or if the instrument is used in a manner not conforming to its intended use.
2.Press and hold the “Power Key” for about 3 seconds to turn OFF the machine. 3.If no key input for 10 minutes, the machine will power off automatically to save the battery. 4. User can use either normal keys or touch screen for key operation 2012-5-15 FiT333(333-11Y06139)
The machine will analyze the breath sample and the test result will then be shown on the display after analyzing. Press “Retest” icon to start another test or press “Save” to input the relevant information. Press “Exit” to return back into the main menu; 2012-5-15 FiT333(333-11Y06139)
Page 8
Press “Exit” key to return back. To ensure the accuracy and no environment residue, the machine should rest for 3 minutes for each quick test.. Also, need to change the mouthpiece for each test 2012-5-15 FiT333(333-11Y06139)
Alcohol Unit, “mg/L: Permillage”, set Airflow, Alco Calibrate, Sensor Amend, Temperature Amend, Set date&Time, Set Misc. See picture below: Caution: The calibration is already been done before shipping, user alters the setting parameters will override all calibration data. Only FiT authorized technician is allowed to modify the calibration data. 2012-5-15 FiT333(333-11Y06139)
Page 10
Alcohol Calibrate (Available for Service Center only) ④ Enter the calibration mode by input the supervisor password. Only allowed to perform this function by FiT or FiT authorized service center (The detailed calibration procedure will only provided to FiT authorized dealer or service centre.)
Page 11
Sensor Amend (Available for FiT Technic Service Center only) ⑤ This is the new data compensation function, can adjust the parameter of the Sensor manually to ensure the accuracy of the terster. a. Red curve: new compensation data b. Blue curve: current compensation data c.
Set Misc (Available for FiT Technic Service Center only) While using the FiT333 tester, the test parameter can be adjusted according to requirement, but this setting operation only for FiT or FiT Technic service centre. Heat Clean Time-> sensor/chamber warming up time: in this setting time range, tester will enter into next step after the Temperature reached to the expected value.
7. PC download Connect the computer using FiT download cable, open the PC application software. Details please refers to the data upload software manual. 8. Change the wireless printer module as following.
Then use the wireless printer to printing the test result as following. Connect the car Wireless receiver Printer module Caution: Keep the wireless printer in warm area. (inside the car) 9. Software Update (only suitable for FiT service centre) 10. Accessory: Standard accessory Skin sheath 1pcs...
13. How often should I re-calibrate the FiT tester? The FiT tester can remain accurate for 6 months of use. The more frequent the use, the more the unit will need to be calibrated. According to D/N31051, we recommend recalibration on a 6 monthly (or earlier) basis to ensure maximum accuracy.
Need help?
Do you have a question about the 333 and is the answer not in the manual?
Questions and answers