Page 1
Professional Breath Alcohol Analyzer With Fuel Cell Sensor FiT333 IMPORTANT: Many factors (e.g. environment gas residue, smoke & various smell in human mouth, etc…) may affect the Blood Alcohol Concentration (BAC) level, so the Readings are For Reference Only. Neither the reseller nor manufacturer accept any liability arising from the use of this unit.
Measuring instrument……………………………………………………………………..3 What is What?........................4 Basic Scientific Principles…………………………………………………......5 Maintenance…………………………………………………………………………….….5 Intended Use………………………………………………………………………….…..5 Preparation…………………………………………………………..……………….……6 Power up…………………………………………………………………………….…..6 Operation instructions…………………………………………………………….…..…..7 Quick start……………………………………………………………..……………..…..7 Alcohol Menu……………………………………………………….……………...….…..8 System setting…………………………………………………….…………………...…..9 Misc………………………………………………………………………………….…..10 Especially low temperature operarion…………………………………………….…..10 Accessory………………………………………………………………………….….…..11 Specification…………………………………………………………………...………….11 Calibration…………………………………………….…………………….…...…...….12 How often should I re-calibrate the FiT tester………………………………….…..12 2009-9-22 FiT333(333-09Y03828)
1. LCD with tough panel 2. Power Key 3. Back Key 4. “OK” Button 5. UP Key 6. Right Key 7. Down Key 8. Left Key 9. Mouth piece 10. Inner tube 11. USB Jack(Connect computer) 12. Printer 2009-9-22 FiT333(333-09Y03828)
To achieve the high accuracy, user should study this manual carefully. And any use of the FiT333 requires full understanding and strict observation of these instructions.
Press the “Power Key” key 3 seconds to turn ON the tester, than enter into the main interface. Press the “Power Key” few seconds (above 3 seconds) to turn OFF the tester. When the machine on, user can use either normal keys or touch screen for key operation 2009-9-22 FiT333(333-09Y03828)
1.6 Remove and change a new mouthpiece after each test. Push the REJECT trigger to repel the mouth piece 1.7 Printer: The printer can be detached from the tester (Option: The detached printer can be connected to a wireless module and become a wireless printer) 2009-9-22 FiT333(333-09Y03828)
3. Change a new inner tube and mouth piece Change a new inner tube and mouth piece If test time above 30 minutes, please change a new inner tube or allow the device to rest for 3 minutes. 2009-9-22 FiT333(333-09Y03828)
Enter the calibration mode by input the supervisor password together with a hardware key. Only allowed to perform this function by FiT or FiT Authorized service center (The detailed calibration procedure will only provided to FiT authorized dealer or service centre.) 2.4 Test record:...
Caution: User should take care the password. User can only ask FiT service centre to reset the password if user forgot it. Service centre may charge for this service. 3.5 Power Managent: set the period of power auto off and backlight time 3.6 Touch Screens Calibrate: When the touch screen setting shift, it can be re-calibrated.
Then use the wireless printer to printing the test result as following. Connect the car Wireless receiver Printer module Caution: Keep the wireless printer in warm area. (inside the car) 6. Software Update (only suitable for FiT service centre) 7. Accessory: Standard accessory Skin sheath(1pcs) 09Y03672...
10. How often should I re-calibrate the FiT tester? The FiT tester can remain accurate for 6 months of use. The more frequent the use, the more the unit will need to be calibrated. According to D/N31051, we recommend recalibration on a 6 monthly (or earlier) basis to ensure maximum accuracy.