Restricting Use Of Your Discs; Locking A Disc With The Read-Protect Function; Locking A Disc; Canceling Read-Protect - JVC XL-MV33BK Instructions Manual

RESTRICTING USE OF YOUR DISCS

Locking a disc with the
Read-Protect function

Locking a disc

The Read-Protect function restricts viewing of a disc. Only people who
know the code can unlock the disc. You can lock only Video CDs (up
to a maximum of 10 discs).
Notes
• When you lock a disc using the Read-Protect function, your Player
recognizes the number of tracks and the recorded time on that disc.
If you try to play another disc which has exactly the same number
of tracks and the same recorded time, the Player may mistakenly
assume that it is the locked disc.
• You cannot lock a disc while it is playing, or when the VCD light is
blinking (i.e., immediately after turning on the player or shutting a
disc tray). Stop the disc, then lock it.
• All Read-Protect functions are performed using buttons on the
Player, not on the remote control.
Operation
1. Play the disc for a moment, then press the Stop button.
2. Hold down the NEXT button on the Player for at least three
seconds. The track and time numbers are no longer displayed.
3. Press the Number key "8" four times. The Display window
indicates "Loc."
Now the disc cannot be viewed. You can open and close the tray and
you can turn the Player power on and off, but no other functions are
available for this locked disc.
Notes
• PROTECT is displayed on the television screen.
Cut out the following instructions and keep them separately, to
ensure privacy.
Page 20
STILL
NEXT

Canceling Read-Protect

Operation
1. Place the disc in a tray, then press the Disc button for that tray.
PROTECT is displayed on the television screen.
2. Hold down the PREV (Previous) button on the Player for more
than three seconds. The indication "Loc" in the Display
window will flicker for a moment.
PREV
3. Press the Number key "8" four times. You can now play the
disc.
1 2
6 7
Canceling Read-Protect for a single
viewing
Operation
1. As above, hold down the PREV (Previous) button on the Player
for at least three seconds. The indication "Loc" in the Display
window will flicker for a moment.
PREV
2. Press the Number key "7" four times. You can now play the
disc, but only until you press the OPEN/CLOSE button for that
disc, or until you play another disc. (Turning off the Player
power does not lock the disc again.) This function is conve-
nient when you want to play a disc, but you also want to restrict
its use later.
3 4 5
8 9 1 0
+
10