Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Soulution 530
Summary of Contents for Soulution 530
- Page 1 Series 5 soulution nature of sound 530 Integrated amplifier User manual...
- Page 3 We understand your eagerness to get started but even though please study this manual step by step before you integrate the integrated amplifier 530 in your High Fidelity system. This manual contains also useful tips for the optimisation of your overall HiFi-system.
- Page 4 CE-Declaration of Conformity Spemot AG declares that this product is in conformance with the following direc- tives and standards: Low Voltage Directive 2006/95/EG (EN/IEC 60065:2002) Electromagnetic Compatibility 2004/108/EG (EN 55013:2001, EN 55020:2002, EN 61000-3-2:2006, EN61000-3-3:1995) FCC-Notice Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
-
Page 5: Table Of Contents
Keep the packing for future transportations Unpacking Treat the top class surface with care Position the integrated amplifier 530 on a stable base. Positioning Cooling air must be able to escape unrestricted. Disconnect all appliances of your system from the mains ... -
Page 6: Technical Highlights
Technical Highlights Design The audio section of the 530 is physically separated from the power supply and dig- ital circuits. In order to reduce interferences to a minimum, these sections are addi- tionally shielded. The power amplifier section is executed in dual-mono layout. The left and right audio channels have their own respective identical boards to deliver a channel separation of >105dB for a three dimensional sound stage. -
Page 7: Safety Advice
foreign substances or liquidity have entered the 530 the 530 has seen rain the 530 seems to malfunction the 530 has fallen to the floor or the housing is damaged Page... -
Page 8: Scope Of Delivery
User manual Rear side Mains (A) Connect the integrated amplifier 530 with the mains. After switch-on, the 530 changes to operating condition OFF (red LEDs in display, consumption <0.5W). Only switch-off the mains connection in operating condition OFF. Input IN 1...IN2 (B) & Input IN 3...IN 4 (C) - Page 9 IN 5 (Phono) +36dB +42dB +96dB LINK (G) The LINK-connection allows controlling the switch-on of other soulution products. Start-Mode defines the behaviour of the 520 after switch-on. RS 232 Interface (H) All functions can be controlled through the RS 232 interface. Page...
-
Page 10: Front Side
The integrated amplifier 530 remains in MUTE until all connected LINK- components are switched on (Display LINK Connect). If an error occurs within a LINK-component the display shows LINK ERROR. When the integrated amplifier 530 is switched off all connected LINK components are switched off simultaneously (operating condition OFF). Page... - Page 11 Change to Input-Select Mode Input-Select The new input can be selected and will be activated after timeout of approx. 3 sec. Display / IR-receiver (N) The display shows all relevant information of your integrated amplifier 530. Page...
-
Page 12: Remote Control
Remote control Taste Pre-Modus CD-Modus IR-transmitter Operation until 5m distance and angel of ±45°. (2,3) Volume +/- DIM / Volume-Dim Play/Pause (5/6) Select +/- Next / Previous track Enter function for Program-Mode... -
Page 13: Program-Mode
Integrated amplifier User manual Program-Mode General The integrated amplifier 530 can be adjusted to your individual setup. It is already programmed with default settings. Further programming is not mandatory. We recommend to adjust the Start-Volume and to set the Max-Volume. Function... - Page 14 Remarks NORM (Master) Start-Mode defines the behaviour of the LINK (Slave) 530 after switch-on. It can always be AUTO (Master) switched-off via the power button on the front panel. IN 1, IN 2, IN 3, Defines which input shall be active after IN 4, IN 5 start-up.
- Page 15 The intensity of the display can be adjust- 2 = medium ed in three steps. 3 = high 1, 2 Defines the identification of the 530. The identification of the remote control has to be defined accordingly Activates the default values (bold) for all functions.
-
Page 16: Trouble Shooting
If the current at the pre-out is higher than 0.2 A the MUTE OVERCURRENT function is activated and the display shows OVERCURRENT. If you can not identify the error please disconnect the integrated amplifier 530 from the mains supply and contact your soulution dealer. Service If your soulution product needs service please contact your soulution dealer. -
Page 17: Safety Functions
Transport damages are not subject to this guarantee, repairs will be charged. We recommend effecting transport insurance. If you do not posses the original packaging no more please contact your soulution dealer. Basic repairs may be completed by your soulution dealer. Please clarify whether he is able to do the work before you send the product back to us. -
Page 18: Specification
Specification Specification Data General Nominal voltage 100 - 240 V, 50-60 Hz Nominal rating 1000 - 2000 W Power consumption Standby <0.5 W Input (IN 1...IN 5) Impedance Balanced (IN 1...IN 2) 10 k Unbalanced (IN 3...IN 4) 47 k... -
Page 19: Dimensions
Integrated amplifier User manual Dimensions Page... - Page 22 Spemot AG Industriestrasse 70 CH-4657 Dulliken www.soulution-audio.com info@soulution-audio.com soulution nature of sound part.no. 92149...
Need help?
Do you have a question about the 530 and is the answer not in the manual?
Questions and answers