Table of Contents
Advertisement
Danger
The unit is not suitable for use in rooms in which special conditions prevail
(e.g. a corrosive or explosive atmosphere).
1.5 Conventions used for the safety instructions in these
Instructions for Use
Note
Indicates a practical hint to the user or other particularly useful information.
Caution
Indicates a usage or mode of operation whose non-observance may result in
irregular operation, damage to the unit or other problems.
Danger
Indicates dangerous situations which may result in bodily injury.
2
Commissioning
2.1 Unpacking the single-user vacuum-cleaning unit
1.
Place the box on a level surface.
2.
Remove the outer packaging material.
3.
Push the packaging material always from the unit and seize the lower edge
of the unit.
4.
Two people must be present to lift the unit out of the box (weight
approximately 25 kg).
5.
Check to ensure that all components are present:
-
Documentation
-
Mains cable
-
Control cable
-
Vacuum hose, 40 mm in diameter, 2 m in length, with two 40-mm
connecting ducts
-
Single-use filter bags, paper, 5 ea.
2.2 Short description of the unit – Identification of components
The CERCON CLEAN single-user vacuum-cleaning unit features a powerful
noise-reduced high-capacity pressure fan and is equipped with an internal
potentiometer for regulating the amount of air, an automated power-off
function and a filter change indicator.
The vacuum-cleaning unit can be operated on any voltage between 200 and
240 V without any effect on the preset input air volume.
The CERCON CLEAN is used as a vacuum accessory for dental milling
units.
The vacuum function is turned on automatically as soon as the milling unit is
activated.
The dust is collected in a double-layer single-use filter bag made of paper.
The capacity of this filter bag can range up to 10 kg depending on the type of
4/15
Advertisement
Table of Contents
