Heated Hand Grips Oe - BMW R 1200 RT Manual

Activating ASC function
4
60
Press and hold ASC button 1
z
until ASC warning light
changes its display behavior.
ASC warning light goes out;
if self-diagnosis is not com-
pleted, the ASC warning light
begins to flash.
Release ASC button within two
seconds.
ASC warning light remains
off or continues to flash.
ASC function is activated.
As an alternative to pressing
ASC button, ignition can also
be switched off and then on
again.
If the ASC warning light
lights up after switching
the ignition off and on and then
continued driving over 5 mph
(10 km/h), an ASC error has
occurred.
Heated hand grips
1 Heated hand grip switch
The handlebar grips can be heat-
ed at two different levels. The
heated hand grips option can on-
ly be activated when the engine
is running.
The increase in power con-
sumption caused by the
heated hand grips can drain the
battery if you are riding at low
engine speeds. If the battery is
inadequately charged, the heat-
ed hand grips are switched off to
OE
ensure starting capability.
2 Heating function off.
3 50 % heat output (one dot
visible).
4 100 % heat output (three
dots visible).