Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the tightening
torques checked by a specialized
workshop, preferably an
authorized BMW Motorrad
retailer.
Place rear wheel on rear wheel
support.
Install screws 3 with specified
torque.
Rear wheel on wheel car-
rier
Tightening sequence: Tight-
en diagonally
44 lb/ft (60 Nm)
Turn muffler to its initial posi-
tion.
If the gap between the rear
wheel and the muffler is too
small, the rear wheel can over-
heat.
The gap between the rear wheel
and the muffler must be at least
20 mm.
Install screw 2 for muffler
bracket in rear footrest, but do
not tighten it yet.
8
119
z