How To Disconnect Your Usb Plug & Scan Dongle - Baracoda USB Plug User Manual

4 How to disconnect your USB Plug & Scan Dongle
There are 3 different ways to disconnect a scanner from the USB Plug & Scan dongle.
1. Reading the disconnect barcode with the connected barcode. Use this barcode to disconnect
your barcode scanner from a USB Plug and Scan dongle.
2. Make sure that the Plug and Scan dongle is plugged into the USB port of the computer.
Launch the HID2HCI.exe Program.
A terminal window will open. Select choice: reset device.
3. Connect another scanner by reading the dongle's connect barcode with it.
June 07
USB Plug & Scan Dongle - User Guide
Disconnect barcode
© Baracoda 2007 10