Front Panel - PROCEED PCD 3 User Manual

Front panel

s t o p
p r e v
3
6
16
1 standby
When the master power switch on the rear panel is in the "|" (on)
position, pressing this button takes the PCD 3/PDT 3 out of
"standby" mode, turns the Display on, and makes the PCD 3/PDT 3
ready to play a CD. Pressing the button again puts the
PCD 3/PDT 3 in standby mode and clears any previously
programmed sequence of selections. (See "Rear panel" and "Set-
up and installation.")
2 play
After a CD is loaded into the drawer, pressing this button begins
play with the first track on the CD (or the first track in a
programmed sequence).
If you press play while the drawer is open, the drawer closes and
play starts beginning with the first track on the CD.
Pressing play while a CD is playing suspends play, returns to the
beginning of the current track, and replays that track.
3 stop
Pressing this button while a CD is playing stops play and clears any
previously programmed sequence of selections.
Pressing play after pressing stop begins play again with the first
track on the CD.
15
TRACK INDEX MIN SEC
p l a y p a u s e
n e x t
2 4
5
17
9 8
7 12
progm repeat
prev next
index index
11 10
14
e r r o r
d r a w e r
13
s t a n d b y
1
3