Specifications, Pcd 3; Pin Assignments, Male Xlr Balanced Analog Output - PROCEED PCD 3 User Manual

Pin assignments, male XLR
balanced analog output

Specifications, PCD 3

Frequency response:
Total harmonic distortion (THD):
Dynamic range:
Signal-to-noise ratio:
Channel separation:
Intermodulation distortion (SMPTE IMD):
Digital-to-analog conversion:
Filtering:
Low-level linearity:
Output impedance:
Mains voltage:
Mains frequency:
Power consumption:
Shipping weight:
Overall dimensions
Width:
Height:
Depth:
Madrigal Audio Laboratories, Inc., reserves the right to change this
product's features and specifications without notice.
Pin 1: Chassis ground
Pin 2: Signal + (non-inverted)
1 2
Pin 3: Signal – (inverted)
3
10 Hz – 20 kHz +0dB, -0.2dB
0.004% @ 1 kHz, 0dB
Two precision 20-bit DACs
8x oversampling digital filter
Analog filter, linear phase to 40 kHz
Deviation unmeasurable to below -70dB,
approximately +1.0dB below -90dB
(undithered, ref 0dB @ 1kHz)
25W @ 120V, 60 Hz
104dB (or better)
107dB
120dB
0.008%
<1 Ω
120 V U.S. service
50/60 Hz
27 lbs/12.24 kg
8.4 in/214 mm
8.9 in/227 mm
13.25 in/337 mm
23