Express Timer Programing - JVC LPT0641-001A Instructions Manual

46
EN
Express Timer
Programing
If you do not know the PlusCode number for the program
you wish to record, use the following procedure to set
your VCR to timer-record the program.
Before performing Express Timer Programing:
Make sure that the VCR's built-in clock is set properly.
Turn on the TV and select the AV mode.
T
1
4
7
1
W
2 3
2
5 6
8 9
0
4
DV S-VHS
TIMER RECORDING (cont.)
A
Turn on the VCR.
Press POWER.
B
Load a cassette.
Insert a VHS (or S-VHS) cassette with the record safety
tab intact.
OR
Insert a Mini DV cassette with the erase protection switch
set to "REC".
C
Select the deck.
Press S-VHS or DV.
D
Access the PlusCode screen.
Press PROG.
E
Access the Program screen.
Press START+/–. (If you're
just starting out and you have
selected the VHS deck, "VHS
PROGRAM 1" appears.)
F
Enter the program start time.
Press START+/– to enter the
time you want recording to
start.
Press and hold START+/– to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
G
Enter the program stop time.
Press STOP+/– to enter the time you want recording to
stop.
Press and hold STOP+/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.