Express Timer Programing - JVC HR-S8007UM Instructions Manual

26
EN
Express Timer
Programing
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
DAILY
3 4
5
2 9
Downloaded from: https://www.usersmanualguide.com/
1 2 3
2
4 5 6
7 8 9
4
0
1
You can directly program the VCR's timer to record up to
8 broadcasts, as far as a year in advance. Remember, the
clock must be set before you can program the timer (
pg. 6 or 9).
1
Load a cassette
Make sure the record safety tab is intact. If not,
cover the hole with adhesive tape, then load it
into the VCR.
● The VCR turns on, and the counter is reset,
2
Access VCR PLUS+ screen
Press PROG.
3
Access Program screen
Press START +/–. (If no
program is stored,
"PROGRAM 1"
appears.)
WEEKLY
0
7
4
Set program start time
6
Press START +/–
repeatedly to enter the
8
time you want
recording to start.
● Press and hold START
9
5
Set program stop time
Press STOP +/– repeatedly to enter the time you
want recording to stop.
● Press and hold STOP +/– to increase the time in
6
Set program date
Press DATE +/–. (The current date is displayed on
the screen. The date you enter appears in its
place.)
7
Set channel number
Press PR +/–.
● Holding down PR +/– rapidly changes the
● If you receive your programs through a cable
8
Set tape speed
Press
TIMER RECORDING
automatically.
PRESS (+/–, SP/EP, 8=DAILY,
PRESS (PROG.) TO END
PRESS (+/–, SP/EP, 8=DAILY,
+/– to increase the
time in 30-minute
PRESS (PROG.) TO END
intervals.
30-minute intervals.
channel numbers.
box, select the cable box output channel — the
channel on which you view the cable box
programs on the TV.
(SP/EP) to set the tape speed.
PROGRAM 1
START STOP
– –:– –AM = – –:– –AM
DATE CH
– –/– –/– – – – – SP
9=WEEKLY), THEN (0K)
PROGRAM 1
START STOP
8:00 AM = – –:– –AM
DATE CH
– –/– –/– – – – – SP
9=WEEKLY), THEN (0K)