Table of Contents
Advertisement
44
EN
Changing VCR
Plus+
Setting
®
Turn on the TV and select the AV mode.
1
4
7
1
T
W
2
3
2
5
6
8
9
0
4
DV
S-VHS
TIMER RECORDING (cont.)
The VCR Plus+ programing system assigns a VCR Plus+
guide channel to the TV channels and the cable
channels. These guide channel numbers are also called
the VCR Plus+ channel codes. Most TV listings have a
section, usually a chart, indicating the guide channel
numbers assigned to each station.
To ensure that VCR Plus+ timer recording operates
correctly, it is necessary to set the VCR Plus+ "Guide
Channel Set" for each station.
If you have moved to a different area or if a broadcasting
station's channel number has been changed, perform the
following steps to set the correct guide channel number.
NOTES:
In many instances, the VCR Plus+ guide channel numbers for
cable and broadcast TV stations DO NOT match the channel
number on which it is received by your VCR or cable box.
Check your TV listing, or contact your cable supplier for
details.
Many TV stations can be viewed on cable. Check your TV
listing, or contact your cable supplier for details.
Guide Channel Number Set
A
Turn on the VCR.
Press POWER.
B
Access the Main Menu screen.
Press MENU.
C
Access the Initial Set screen.
Press
to move the highlight bar (arrow) to "INITIAL
rt
SET", then press OK or
e
D
Access the Guide Channel Set screen.
Press
to move the highlight bar (arrow) to "GUIDE
rt
CHANNEL SET", then press OK or
E
Enter the Guide Channel number.
Press
or the number keys
rt
to select the VCR Plus+ guide
channel number as shown in
the TV listing, then press OK or
.
e
If you receive your channels with
a cable box and if you have
properly set your Controller,
"CABLE CH" appears in place of
"VCR CH". If not, perform
"Cable Box Control Setting"
(
pg. 20).
.
.
e
GUIDE CHANNEL SET
GUIDE CH :
6
VCR CH
:
– –
PRESS NUMBER KEY (0–9)
OR ( , ), THEN (OK)
PRESS (MENU) TO END
(Example)
When inputting the Guide
Channel number 6 for WNJU
(ind.).
Advertisement
Table of Contents
