System Connections; Connecting To A Satellite Receiver - JVC LPT0543-001A Instructions Manual

SYSTEM CONNECTIONS

Connecting To
A Satellite
Receiver
21-pin AV input
connector (SCART)
Back of TV
IMPORTANT
When you set "L-2 SELECT" to "SAT" (
the recorder is in Timer mode, in Stop mode, recording or turned off. When the recorder is in Stop mode or recording, press
TV/VCR on the remote control to turn off the VCR indicator on the display panel.
When the recorder is turned off, only a composite signal is output from the recorder to TV.
If you turn on the recorder when the satellite receiver's power is off, nothing appears on the TV screen. In this case, turn on
the satellite receiver, or set the TV to its TV mode, or press TV/VCR on the remote control to set the recorder to the video
mode.
S-VIDEO IN
connector
Aerial
TV Aerial
connector
cable
AUDIO IN
connector
ANT. IN
ANT. OUT
AV1 (L-1)
IN/OUT ENTREE/SORTIE
ANTENNA
ANTENNE
IN
ENTREE
IN/DECODER
AV2 (L-2)
OUT
ENTREE/DECODEUR
SORTIE
pg. 50), it is possible to view a satellite broadcast with the TV set to its AV mode even if
Connect the satellite receiver to the video recorder's AV2 (L-2)
IN/DECODER connector, then connect the recorder's AV1 (L-1)
IN/OUT connector to the TV's 21-pin SCART connector.
NOTES:
Set "L-2 SELECT" to "A/V". (
To record a programme via the satellite receiver, select L-2
mode by pressing NUMBER keys and/or PR so that
"L-2" appears on the display panel.
For details, refer to the instruction manual for the satellite
receiver.
Aerial
Outdoor Unit
Satellite Cable
S OUT
OUT
S
SORTIE
(DV/VHS)
AUDIO
(DV/VHS)
L
OUT
SAT CONTROL
SORTIE
CONTROLEUR SAT
R
pg. 50)
Satellite Receiver Unit
TV VCR DECODER
Back of Recorder
59
Mains outlet