Internet Connection Setup Wizard - D-Link DIR-100 Quick Installation Manual

Internet Connection Setup Wizard

A. Connect the power adapter to the receptor at the back panel of the DIR-100 and
plug the other end of the power adapter to a wall outlet, power strip or other
suitable power source. The Power LED on the front panel will light green to indicate
the device is on.
B. Insert one end of the Ethernet cable into a NAT port (port 3 or 4) on the back panel
of the device and the other end of the cable to an Ethernet Adapter or available
Ethernet port on your computer. The Ethernet Link LED for the port will light green
indicating a connection.
C. Insert another Ethernet cable into the INTERNET port on the back panel and the
other end into the Ethernet port on a broadband modem such as a cable or ADSL
modem. Normally the broadband device is configured as a simple bridge type
connection.
NAT Ports
Use Ethernet cable
to connect to
INTERNET Port
Connect to
ADSL line
2
Power Input
Connect to
power adapter
The Power LED and
NAT port LED indicate
the device is on and
linked to the computer.