Skip Search - JVC HR-VP830U Instructions Manual

36
TimeScan
Names of
special-effects
playback Search
Speed
X-7 X-5
VCR's Time
Scan shuttle
indicator
Audio output
Audio is output.
* Still mode cannot be engaged using the remote control's TIME SCAN button.
The VCR's TimeScan indicator lights during TimeScan.
The speed is shown in the upper right corner of the TV screen for approx. 5 seconds.
The TimeScan search speed is the same for SP and EP recordings.
To resume normal playback, press PLAY.
When using the VCR's TIME SCAN SHUTTLE ring, the playback speed may not change depending on how far it is turned.
When using the VCR's TIME SCAN SHUTTLE ring, the playback speed will change up to X7 and -X7 search speeds. Turning
the TIME SCAN SHUTTLE ring further will not increase the search speed.
Picture may be distorted at the position where the recording speed is switched.
The picture may be noisy for a moment when you change the playback speed.
Depending on the tape in use, noise may appear or the upper part of the picture may be distorted.
Picture may appear distorted in comparison to normal playback.
In TimeScan mode there will be a time lag between the video and the audio and noise may appear in the audio signal.
TimeScan sound quality will differ in comparison to normal playback.
When the playback direction is reversed, it takes approximately 6 seconds until sound is heard.
1
4
7
PLAYBACK AND RECORDING FEATURES (cont.)
Reverse
Play Slow-Motion
X-3 X-1 X-1/6 X -1/18
SEARCH SLOW
Orange Green
Audio is not output.
2 3
5 6
9
8
0

SKIP SEARCH

Forward
*Still Slow-Motion
0 X1/18 X1/6
SLOW
6
Red Green
Audio is output.
Skip Search
SKIP OVER UNWANTED
SECTIONS
1
Press SKIP SEARCH 1 to 4 times during playback. Each
press initiates a 30-second period of fast- motion
playback. Normal playback resumes automatically.
NOTE:
To return to normal playback during a Skip Search,
press PLAY.
Play Search
X1 X2 X3 X5 X7
SEARCH
Orange