Additional Information - Linksys PLE200 Installation Manual

Installation
G.
The Install Configuration Utility
screen will appear and copy the
necessary files to your computer.
After the files have been copied, the
Congratulations screen will appear.
Click Online Registration to
register the Adapter at
www.linksys.com/registration
(Internet connection required)
Click Exit to close the Setup Wizard.
Hardware installation is complete. If you have more than one PLE200 (PLK200
is a kit containing 2 PLE200s), connect the additional Adapter(s) now. Be sure
to use the Configuration Utility (Accessible via the PLE200 Utility icon on your
desktop) to configure the Adapter(s) and change the default network password.
The default network password (HomePlug AV) should be changed to a new
password on all devices. For details, please refer to the User Guide located on
the CD‑ROM.

Additional Information

For warranty, regulatory, user information for consumer products covered
by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment
(WEEE), and specifications, refer to the User Guide on the CD‑ROM.
Linksys contact information is available at the end of this document
and on the CD‑ROM (or as an insert included in the box).
WEB:
products and updates to your existing products at
www.linksys.eu or www.linksys.com/international
4
Visit us online for information on the latest
Congratulations Screen Congratulations Screen