Linksys Instant Powerline PLUSB10 Quick Installation

This Quick Installation is meant to help you install the product quickly and easily. For detailed instructions
on installation and configuration, and further setup options, please consult the User Guide.
Instant PowerLine™
P P o o w w e e r r L L i i n n e e U U S S B B A A d d a a p p t t e e r r
Package Contents
• PowerLine USB Adapter (1)
• USB Cable (2)
• Setup CD-ROM with User
Guide (3)
• Quick Installation (this document)
• Registration Card (not shown)
2
For more detailed instructions, please refer to
the User Guide on the Setup CD-ROM.
PLUSB10 ver. 2
Note: You must have Windows 98SE, 2000,
Millennium, or XP installed on your PC.
Windows 95 and NT do not support the
PowerLine USB Adapter.
Using the Setup CD-ROM
A. Insert the Setup CD-ROM into the computer's CD-ROM drive. The Setup
CD-ROM should run automatically. If it does not, click the Start button and
choose Run. In the box that appears, enter D:\setup.exe (if "D" is the letter
of your CD-ROM drive).
B. The Welcome screen will appear. To install the PowerLine USB Adapter,
click Next. To view the User Guide, click User Guide.
C. When the License Agreement screen appears, click the radio button next to
I accept the terms in the license agreement, and click Next.
D. Enter your User Name and
Organization Name. Select
Anyone who uses this computer
(all users) to install a shortcut to
the Configuration Utility on every
user's desktop. Then click the
Next button.
D
E. Click the Install button to begin
installation of the Configuration
Utility.
3
Windows 2000 users: Windows
1
will inform you that there was no
digital signature found. Click the
Yes button to proceed with the
installation.
Windows XP users: Windows will
E
notify you that the driver has not
passed Windows Logo testing. Click the Continue Anyway button.
F. Click the Finish button to exit.
G. Restart your computer when asked to
do so.
H. Eject the Setup CD-ROM from the
CD-ROM drive.
F
Connecting the PowerLine USB
Adapter to Your PC
Note: Make sure you insert the Setup CD-ROM and run the Installation
Wizard before you connect the PowerLine USB Adapter to your PC.
A. Insert the end of the USB cable with the Type A connector (rectangular) into
the computer's USB port.
A
B. Insert the USB cable's Type B connector into the USB port on the
PowerLine USB Adapter.
PLUGS INTO
ELECTRICAL
OUTLET
USB PORT
B
C. Plug the PowerLine USB Adapter into an electrical outlet.
C
Important: Because the PowerLine USB Adapter sends data over the pow-
erlines of your house, it is best to plug it directly into an electrical outlet. Do
not plug the device into a UPS or power strip with surge protection. The
PowerLine USB Adapter has its own power filter for protection against
surges.
Continue to Step 3
W W W . L I N K S Y S . C O M