Advertisement
Advertisement
Related Manuals for Linksys PAP2T-NA
Summary of Contents for Linksys PAP2T-NA
- Page 2 All Rights Reserved. Copyright © 2007 The use, disclosure, modification, transfer, or transmittal of this work for any purpose, in any form, or by any means, without the written permission of the copyright holder, is strictly forbidden. Disclaimer The content of this manual is subject to change without notice and should not be construed as a commitment by the manufacturer, distributor, or service provider.
- Page 3 Linksys PAP2 Devices Administrator’s Guide Table of Contents 1 WELCOME ............... 2 ................2 VERVIEW PAP2 ’ ONFIGURING THE DEVICE WITH HONE ............3 ROVISIONING ERVER ..........9 EMOVING OICE ERVICE...
- Page 4 Overview Congratulations on purchasing your Linksys PAP2 telephone adapter! The Linksys PAP2 device is a voice over Internet protocol telephone adapter. It is based on the SIP (Session Initiation Protocol), which is by far the most widely used protocol by Internet telephone service providers (ITSP).
- Page 5 Linksys PAP2 Devices Administrator’s Guide Configuring the PAP2 device with Net2Phone’s Provisioning Server NOTE: The provisioning process can be completed prior to provisioning the device in the Partner Resource Center. PAP2 O PROVISION THE INKSYS DEVICE Determine which PAP2 device you are using.
- Page 6 Linksys PAP2 Devices Administrator’s Guide PAP2T-NA PAP2T-R...
- Page 7 The service will not function if the incorrect provisioning string is used. Connect the Linksys PAP2 to your network by connecting one end of a network cable to the Ethernet port and the other end to your broadband router.
- Page 8 Linksys PAP2 Devices Administrator’s Guide Enter your Login and Password. 10. Click the switch to advanced view link at the top of the page. 11. Select the Provisioning tab at the top of the page. 12. In the Profile Rule field enter the string assigned to your particular PAP device model.
- Page 9 Linksys PAP2 Devices Administrator’s Guide PAP2T: http://prov1.net2phone.com/pap2t/prov.aspx?id=$MA &ver=$SWVER IMPORTANT: The string is case-sensitive and must be entered exactly as it appears. Failure to do so will render the adapter non-functional.
- Page 10 Linksys PAP2 Devices Administrator’s Guide IMPORTANT: Be certain that you are using the correct string for your particular PAP device model number. Failure to do so will render the device non-functional. 13. Click the Submit all changes button at the bottom of the page 14.
- Page 11 Linksys PAP2 Devices Administrator’s Guide Removing VoiceLine Service The following procedure removes the VoiceLine account from the PAP2 device. Login to the Partner Resource Center and close the device’s account from the Edit Device Information page. Wait 10 minutes and reboot the device by...