Cessna , 337 Skymaster Assembly Manual page 10

CESSNA 337 SKYMASTER
Fuel pick-up tube.
10) Connect the lines from the tank to the
engine and muffler. The vent line will connect
to the muffler and the line from the clunk to the
carburetor.
Blow through one of the lines to en-
sure the fuel lines have not become kinked
inside the fuel tank compartment. Air
should flow through easily.
FUEL TANK INSTALLATION AFTER.
You should mark which tube is the vent
and which is the fuel pickup when you attach
fuel tubing to the tubes in the stopper. Once
the tank is installed inside the fuselage, it may
be difficult to determine which is which.
7) Slide the fuel tank into the fuselage.
Guide the lines from the tank through the hole
in the firewall.
10
vent tube.
Fuel fill tube.
8) Use plywood template to hold in place the
fuel tank with C/A glue to secure the fuel tank
inside the fuselage.
balsa wood included.
9) Use balsa stick to help prevent moveable
from transferring to the fuel tank.
Fuel pick-up tube.
10) Connect the lines from the tank to the
engine and muffler. The vent line will connect
to the muffler and the line from the clunk to the
carburetor.
Instruction Manual.
Fuel tank.
Fuel tank.
Rubber band.
Epoxy
vent tube.
Fuel fill tube.