Front Panel Controls - Ceriatone 50W Overtone Special User Manual

10) Push VOLUME control in to disengage BRIGHT switch
11) Set front panel DEEP and MID BOOST switches in the down position
12) Set front panel ROCK / JAZZ switch in the up position (ROCK)
13) Set rear panel MAINS switch in the ON position (with adjacent switch to STANDBY) for 30 seconds to allow tube
filaments to warm up
14) Set rear panel OPERATE / STANDBY switch to OPERATE
15) ROCK!!!!!!

3) FRONT PANEL CONTROLS

On the front panel of the Bluesmaster Overtone Special, you can see fourteen items of interest.
From left to right:
1) INPUT ¼" instrument jacks (LO and HI)
2) VOLUME control
3) BRIGHT two-way push-pull switch on VOLUME control
4) DEEP two-way toggle switch
5) MID BOOST two-way toggle switch
6) ROCK / JAZZ two-way toggle switch
7) TREBLE control
4